Tuesday, July 20, 2010

Honesty is always the best safety policy: CM Steps-up to the Challenge

Well known electric chain hoist manufacturer Columbus-McKinnon (Commonly known as 'CM') issued a statement reminding customers about a known safety issue with some of their hoists.  This Safety statement pertains to questions about brake retaining pins on the company's hoists.

The company statement follows:

"There has been some information circulating recently within the Entertainment Industry in reference to brake retaining pins on Columbus McKinnon Hoists. This issue goes back to 2006 when Columbus McKinnon issued the attached notice concerning a small number of brake retaining pins for the following hoists: Prostar, Shopair, Shopstar, Shophoist, Model CPS, Budgit Series, Coffing SLC, Little Mule SLM and Yale SAL powered chain hoists built between February 2005 and April 2006. The serial numbers that were affected had the last two letters of RP, RQ, RR, RS, RT, RU, RV, RW, RX, RY, RZ, SA, SB, SC and SD.


"Columbus McKinnon did notify at that time every distributor that purchased the affected hoists and sent out replacement pins. Our distributors did a good job of notifying their customers and having the pins replaced. However it has come to our attention that some end users of the affected hoists may not have replaced the brake pins. If you have a hoist model and serial number listed above and the brake pin has not been replaced, please contact Columbus McKinnon directly at the number below.


Dean Sullins or Lee Gregor
1-800-634-4647
dean.sullins@cmworks.com
lee.gregor@cmworks.com"

Support manufacturer's that support your safety (and the gear above your heads).  CM LoadStar Hoist School is a great way to get first-person training (www.cmcodepot.com/cm-ettraining.aspx) regarding the hoists used by many of the touring show professionals around the world.

Visit CM's Entertainment Industry hoist web site (www.cm-et.com/) for more information.  These are versions of their commercial hoists that are specifically tailored to the unique needs of the show production industry.

No comments:

Post a Comment